Six manufacturers of sulphur fluoride should do well the protective measures
In the process of production, six sulfur fluoride manufacturers should do a good job of protection? Today, we will talk to you about this situation.
To prevent the spread of gas, should be fully open all fan system, strong exchange. Six SF manufacturers should organize to wear chemical protective clothing, wearing masks, gloves, protective glasses, take full preparation, to enter the room to check the accident device.
Six, the rupture of the explosion-proof membrane of the electrical equipment of sulfur fluoride gas is mainly due to serious insulation problems inside the body, and the damage of the equipment parts is caused by the arc, causing the internal pressure to exceed the standard. Therefore, six sulfur fluoride manufacturers must stop power, then carry out treatment, find out the cause of the accident, under the premise of security personnel, to handle.
Because of the pure chemical stability of the pure SF6 gas, the early six sulphur fluoride manufacturers were used in artificial pneumothorax for the treatment of pulmonary tuberculosis cavity. At the same time, the excellent arc extinguishing and insulation performance are also concerned.
In 1940, the SF6 gas produced by six sulfur fluoride factory started as an insulating medium, and has been widely applied in power equipment, such as high voltage circuit breakers, transformers, transformers, capacitors, arresters, contactors, fuses, pipeline mother and so on.
The content of the article comes from six sulphur fluoride manufacturers: www.feiliergas.com/